Normally, the garage doors around us are manually operated. These garage doors must be manually opened or closed. You will lock and unlock them with your hands. To avoid the ordeal of manually operating your garage door, you should install your automatic garage door opener. Garage door installation is not at all a difficult task. All you need is to have an assistant for some tasks that you can do yourself with a little knowledge in just a few hours.
First, you need to position the track for the garage door to open or close. Once you have placed the track, connect it to the drive unit. This drive unit consists of a motor that will do all the work related to opening or closing the garage door. After this, connect all the parts of the track. Now connect the riser bracket to the end of the track and then attach it to the spindle over the garage door opening.
In the next step, due to its weight, you will have to connect the motor to the shaft present on the roof. Now connect the motor cables to the electrical panel on the wall. Now, the installation of infrared sensors is also quite important for the garage door to stop while closing if something comes between the door. In the last step, you will connect the gate to the gate opener that you will use to open or close the gate.
This is the diagram of the different steps related to the installation of garage doors. To complete this process successfully you will need to know how this works. However, if you are stuck somewhere, you should read the installation manual first, and if the problem cannot be solved, be prepared to call the professional to help you in the installation process.